您的位置：网站首页 > 公司新闻 > 正文
公司新闻

【水性环氧煤沥青涂料】的主要特点以施工

作者：admin 来源： 日期：2017/4/17 13:20:02 人气： 标签：
　　导读：水性环氧煤沥青涂料性能特点能够兼具环氧树脂和煤焦沥青的特点，能够长期经受干湿交替、阴暗潮湿以及浸水等恶劣环境。在室内、地下、水下等有益的表现中，应该有长效水性环氧煤沥青涂料作为一种新功能产品。
　　Takeaway: water-based epoxy coal tar coating performance characteristics to the characteristics of both epoxy resin and coal tar, can withstand alternating wet, damp, and for a long time of soaking and other bad environment. Indoors, underground and underwater good performance, there should be a long-lasting water-based epoxy coal tar coating as a kind of new functional products.
　　水性环氧煤沥青涂料的主要特点
　　The main characteristics of waterborne epoxy coal tar coating
　　1、 固体含量高，所以一般可以制成厚涂的重防腐涂料，一次干膜厚度大于100um
　　1, high solid content, so generally can be made into thick coating heavy-duty coating, a dry film thickness is greater than 100 um
　　2、 强大的防霉、耐水、抗渗透性能，耐化学腐蚀和耐油性能极佳
　　2, strong mouldproof, penetration resistance, water resistance, excellent chemical corrosion resistance and oil resistance
　　3、 涂层具有优良的机械性能，硬度高、耐冲击、耐磨及良好的附着力，防腐层性能稳定，使用寿命长、
　　3, the coating has excellent mechanical properties, high hardness, impact resistance, abrasion resistance, good adhesion, coating stable performance and long service life,
　　4、 涂层造假较低，在相同除锈条件下综合造假低，综合性能好，使用场合具有竞争优势。
　　4, coating fraud is low, under the condition of same derusting low comprehensive fraud, comprehensive performance is good, use circumstance has a competitive advantage.
　　5、 可与各类车间底漆配套，对未经除锈的表面具有良好的湿润性，施工方便。涂层自然固化，无需加热，施工简便灵活。
　　5, can be matched with all kinds of shop primer, without rust removing surface has good wettability, construction is convenient. Natural curing coating without heating, construction easy and flexible.
　　水性环氧煤沥青涂料的施工
　　1、 产品的选择：基材要选择混泥土基材，在适应的环境条件下考察温度、湿度，涂装后是否会受到化学腐蚀介质、油品和水的侵蚀；最后考虑施工条件：温度、湿度，以及涂料固化性能与施工条件的适应性。
　　1, the choice of products: base material choose concrete base material, adapt to the environment conditions of temperature, humidity, and after the coating will be viewed by chemical corrosive medium, oil and water erosion; Finally considering construction conditions: temperature, humidity, and adaptability of coating performance and construction conditions.
　　2、 施工准备：包括施工环境湿度。温度，混泥土基面含水率的测定，平整度和PH值得检测 ，基层强度、锈蚀、粗糙度等。
　　2, construction preparation, including the construction environment humidity. The determination of temperature, moisture content of concrete base, flatness and PH worth testing, basic strength, rust, roughness, etc.
　　3、 基层处理-涂刷配套底漆-厚度水性环氧煤沥青涂料 ，达到重防腐的要求。
　　2, construction preparation, including the construction environment humidity. The determination of temperature, moisture content of concrete base, flatness and PH worth testing, basic strength, rust, roughness, etc.
本文网址：
上一篇：【水性无机防腐漆】全能耐酸碱腐蚀产品
下一篇：【水性工程机械防腐漆】在钢结构防腐中的应用